We manufacture and supply world class Air Purification Systems, which are widely used in several industrial applications. The Indoor Air Purification Systems, supplied by us, have emerged as the ultimate solution to corrosion through gaseous filtration, which involve passing contaminant laden air stream through a bed of dry media placed in a properly designed housing. Apart from the basic purification functions, our Indoor Air Purification Systems are equipped with the latest technology in gaseous adsorption, such as Ammonia-Gas Phase Activated Carbon process, which greatly increases the adsorption capacities of activated carbon. The latest technology and high standards of operation of Indoor Air Purification Systems, manufactured by us, make us one of the premium Industrial Air Purification System Exporters from Gurgaon.
Widely Used In
- Ultimate solution to corrosion
- Chemically destroy any remaining gaseous contaminants.
- gas purification equipment range from 72 m3/hr (40 cfm) to 86,400 m3/hr
- Operate and maintain corrosive gas levels at 1 ppb or less
Contaminated Air ?
- Electronics Industries
- Chemical Industries
- Computer Stations
Contaminated air generated from today's industry is laden with undesirable gaseous compounds such as hydrogen sulphide, sulphur dioxide, mercaptans, chlorine, ammonia, nitrogen oxides, hydrocarbons etc. which cause corrosion of process computers and delicate electronic equipment.
Leads to complete component destruction e.g. breakage of sensitive wires & circuits, failure of delicate chips, transistors, ICs etc.
Causes Sporadic electrical hiccups, called intermittent which frequently cause minor computing or controlling errors may contribute to prolonged disruption or even complete shutdown of the plant.
Why do we need to protect our control rooms ?
- Corrosion of electronic components causes
- Production stoppages
- Increased production cost.
- Higher maintenance budgets
- Lower productivity and sometimes, false signals / alarms.
Studies have shown that atmospheres which produce corrosion rates greater than 0.1 microns per year cause unacceptable number of corrosion - related failures of micro-circuitry.
Corrosion Rate per year vs. Equipment Failure (in micro-circuitry)
|< 0.1 micron||No failures found|
|> 0.1 micron||Intermittent failures in 1-2 years|
|> 0.4 micron||Inoperative in 2-4 years|
|> 0.6 micron||Intermittent failures in 0.5 - 1 year|
|> 2.0 micron||Inoperative in 0.25 - 0.5 years|
For electronic equipment, corrosion rate has to be below 0.1 micron per year.
For electrical equipment, the same can be as high as 0.5 micron per year.
(1 micron = 0.001 mm)